Route66 – Video AutoRouter
UNIQUE AUTOMATIC VIDEO ROUTING
Automatically discovers stagebox connection and routes pre-programmed video, audio and data
KEY FACTS:
- Automatic Video, Audio and Data routing
- No software operator required
- Up to 24 stageboxes
- Each stagebox with pre-programmed patch – plug&play stageboxes
Overview Route66 – Video AutoRouter
Route66 Video AutoRouter is a solution dedicated for small and large studio facilities with multiple connection points and mobile stageboxes.
Multiple Route66 Video AutoRouters are interconnected to create an advance routing array, which is specified and built in close cooperation with the customer. Thanks to this, customer receivers a cost efficient, application engineered solution tailored to his requirements.
Video AutoRouter array enables very quick set changes in studio, without necessity of complex programming each time. Video, audio and data channels always follow the stagebox, whenever it is connected. Thanks to sophisticated design Route66 Video AutoRouter array automatically discovers stagebox movement and patches all pre-programmes channels to the port where stagebox is actually connected. The system enables multiple stagebox connection, each stagebox with its unique patch.
On a day-to-day basis no user control is required and all the advanced routing action is done in the background.
Technical Specifications Route66 – Video AutoRouter
| Video ports | ||||
|---|---|---|---|---|
| Standards | SD, ED, HD, Dual Link, 3G, ASI, MADI | |||
| Complies with SMPTE | 259M, 292M, 344M, 372M, 424M | |||
| Interface | SDI – Serial Digital Interface | |||
| Optical Connection | Complies with 21 CFR 1040.10 and 1040.11 | |||
| Connection | LC | |||
| Data rate | Dependent on the Video data rate – no bandwidth restriction | |||
| Fiber cable lengths | Standard singlemode transceiver | ≤ 10 km | ||
| Special singlemode transceiver | ≤ 80 km (on request) | |||
| SANE, LAN ports | Convention | |||
| Audio | TIA – 568A/B, Optocore | 200 Mbit/s | ||
| LAN | TIA – 568A/B, IEEE – 802.3 | 10/100 Mbit/s | ||
| Serial Data Port | Convention EIA / TIA-485 | |||
| Data channels | Digital control data | 4 | ||
| Data rate | Up to 10 Mbps | |||
| Impedance | Termination | 330 Ω | ||
| Source | ≤ 10 Ω | |||
| Auxiliary Fiber Port | 1310nm fiber tunnel | |||
| Connection | Duplex LC | |||
| Data rate | Dependent on the distance between locations – no bandwidth restriction | |||
| Word Clock | ||||
| Data rate | Depending on selected sample rate | Up to 192 kHz | ||
| Impedance | Output | ≤ 5 Ω | ||
| Input | 75 Ω | |||
| Drive level | Output | ≥ 1 Vpp | ||
| Zero level | Referring to GND | + 1.7 V | ||
| Sense level | Input | ≥ 400 mVpp | ||
| Power Supply | ||||
| Type | Switch-mode, universal input | |||
| Mains voltage | 100… 240 V | 50 60 Hz | ||
| Frequency | 50 60 Hz | |||
| Cooling | Passive, via surface and ventilation openings on both sides of the device | |||
| Dimensions | 2 RU / 19” | |||
| W x H x D | 19.0 x 1.73 x 7.87 inch | |||
| Weight | Dependent on configuration | |||
Documents Route66 – Video AutoRouter
- DATASHEET
- MANUAL
- CASE STUDY
Odering Options Route66 – Video AutoRouter
All configurations are tailored to customer needs. No standard order option available.
Our Application Engineering team is there to help with the design. Please contact This email address is being protected from spambots. You need JavaScript enabled to view it. for details.